PRODUCTS
Products
Slope-Grade Engine
Equipped with a 14HP slope-grade engine,
the machine can comfortably operate on slopes of up to 35 degrees.
Electric Cutting Height Adjustment
Equipped with an electric linear actuator, the cutting height can be adjusted conveniently via remote control, simplifying routine maintenance.
Equipped with a smart front bumper that functions as a safety sensor to detect large rocks or obstacles prior to blade impact.
Equipped with an advanced front debris guard to completely block flying stones,ensuring high operational safety.
| Model | RCHR800A | |
| L x W x H (mm) | 1920 x 1000 x 700 | |
| Total Weight (kg) | 348 | |
| Speed (km/h) | Forward |
[High] 0~3.4 , [Standard] 0~2.7 , [Low] 0~1.7 |
| Reverse | [High] 0~3.4 , [Standard] 0~2.7 , [Low] 0~1.7
|
|
|
Capacity (Fen/h) |
Approx. 6.7 (During straight cutting) | |
| Undercarriage |
Rubber tracks |
|
| Drive Power |
2 electric motors 360W |
|
| Cutting Width (mm) | 800 | |
| Cutting Height (mm) | 20 - 250 (Electric hydraulic stepless adjustment) | |
| Cutting Tools | 46 flail blades | |
| Other Features |
Slope assist straight-line tracking feature, Engine overload protection feature, Equipped with emergency stop switch. |
|
| Engine | Type |
B&S 25V337 type Gasoline engine / 14 HP |
| Starting System | Electric starter | |
| Fuel Type |
92 Unleaded Gasoline |
|
| Fuel Tank Capacity | 5.7 L | |
Note: Engine power is indicated by gross horsepower.
Specifications are for reference only and are subject to change due to product improvements.
Working capacity is for reference only and may vary depending on environmental conditions.